Indeed, the cost can easily be nearly doubled if you have to buy these two items to start using the machine. planer It works great connected to the small version of these. I'm thinking about this stand (ShopNotes Vol 16, Issue 91): Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. Always stand to the side. A thin bead of silicone is then smeared on to glue the screen to the frame: I let that dry for a few hours then removed the nails.

I dont have a dust collector yet, so building the stand with dust cabinet was appealing for not only collecting chips and dust out of the blower on the planer but also an all-in-one solution of sorts made sense in my garage where I have very limited space (you can see I share space with bikes, a refrigerator, and a few household items.)

Do you think that would solve that issue? Being the frugal, do-it-yourself type that I am, I figured it would be a good project to make a stand that included infeed and outfeed tables. With the basics done, it was time to get started on building the infeed / outfeed. As always eye protection is a must, and also be sure to check out our selection of masks and respirators.

Homemade dust collection stand constructed from wood and intended to be utilized in conjunction with a planer. To adapt the flexible hose to the PVC sewer pipe, I made a fitting by cutting a section out of one pipe to fit inside the other: The shorter one fits inside the elbow and the flex hose slips right onto the smaller one: With this done, I had to make sure the planer could open to its maximum capacity without pulling the hose off. JavaScript seems to be disabled in your browser. Once again, Im not working with any real plans, just piecing it together as I go. The store will not work correctly in the case when cookies are disabled. And if you plane a lot of rough lumber, be sure to pick up the Lumber Wizard Metal Detector to prevent any disastrous run-ins with metal objects. We like to have at least three additional feet of buffer beyond the maximum stock length.

I do a fair amount of metal work and have wanted to build a dedicated table for this activity for some time now. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. As an example, if you work with 10' boards, shoot for about 13' of clearance on either end of the planer. I used the same method on my folding miter saw stand to good effect. I have mine set up with roughly 24" lonh hose into the side of a garbage bin with the lid cut and a screen in it to let out air. Small particles get out nothing major . That was a problem I was having with the planer: the polished bed was sticky, and the feed rollers couldnt put the stock properly. The only thing left to make before I can test it is the filter. Then the bottom shelf is glued and nailed to the stretchers: I put the planer on the stand to get an idea of where it needs to be. Works great.

Check out this digital read-out for a great option that fits a wide variety of planers, including the DeWalt benchtop planers.

Big thanks to those on LJ whove shared similar projects! If you own the DeWalt DW735 planer, you have the benefit of a built-in dust blower. The DW735 has a "Fan Assist" chip ejector. But before you do, let's make sure you're set up for success. I dont have a fancy dust collection solution yet, and I was thinking of putting a hose from the dust port to a barrel under it, with a screen for ventilation - would this work? We recommend a CFM rating of 500 or greater for a 12" planer, and 600 to 900 CFM for 15" planers and larger. Planed a few test boards and I was very pleased with the results. Never operate your planer without hearing protectionyour ears (and your nerves) will thank you for it. After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in. Terms of Service Nice job and good thinking. You've got your planer, and you're eager to put it to work thicknessing and smoothing rough lumber. Along with that, it also doesnt come with a basic stand to put it on. Because of the sales and rebates, I've decided to pull the trigger on a Dewalt DW735 planer.

Re: DW735 Planer Stand and Dust Collection? If the bed needs to be replaced, it can slide out after these screws are removed. For the DeWalt benchtop planers, check out the DW7350 Mobile Stand. You may also return purchases to a Rockler store near you for store credit. For these items, please call the store where you purchased them or our customer service department at 1-800-376-7856 so we can assist you. For the best experience on our site, be sure to turn on Javascript in your browser. I'll deal with the short blade life issue when it happens, but a portable stand and dust collection are near-term issues. I went to rockler and bought a filter bag for their dust collectors and just hooked that up directly. CRAFTSMAN Benchtop Planer, 15-Amp (CMEW320), DEWALT Thickness Planer, Two Speed, 13-Inch (DW735X), VEVOR Thickness Planer 12.5 inch Wood Planer Foldable 1500W Thickness Planer Woodworking 315"/min Feed Rate Double Cutter Benchtop Thickness Planer with Dust Exhaust Interface Stand for Woodworking, Mophorn Benchtop Planer 13 Inch 1800W Wood Thickness Planer 8000rpm 15AMP Woodworking Planer Foldable 6m/min Planing Speed with Iron Stand Dust Exhaust for Woodworking, Shop Fox W1877 13" Portable Planer with Spiral-Style Cutterhead, POWERTEC 70150 Rectangular Dust Hood Collector ABS Plastic, 4 Inch OD Attachment for Woodworking Dust Collection Hose and Fittings, Table Saw Dust Collector Bag (10" Tablesaws with 2.5" Dust Port) Fits Bosch/Dewalt/Makita/Ryobi/Craftsman/Porter Cable/RIGID/Metabo/Kobalt/Skilsaw/Delta/, POWERTEC 70169 Mini Gulp Dust Hood Collector with 4" ID Port - ABS Plastic Fitting for Woodworking Dust Collection Hose, RitPin Miter Saw Cover, Fit for Most Miter Saws, Planers, Machine Tools, To Prevent Table Saw Rust, Waterproof and Dustproof, Black, Dust Deputy Deluxe Cyclone Separator Kit with Collapse-Proof Buckets for Wet/Dry Shop Vacuums (DD Deluxe 5-Gal), WEN PL1303 15-Amp 13-Inch Three-Blade Benchtop Thickness Planer , Black, POWERTEC 70102 8-1/2-Inch Jointer Dust Hood, 8-1/2-Inch by 10-1/4-Inch by 4 Inch, VEVOR Miter Saw Hood, 5000-L Lighted Dust Solution For Miter Saws, Chop Shop Dust Collection w/Light 110V, Dust Collector Compatible with all Miter Saws, Accessory Holes, Carrying Bag, Wahuda Tools 13" Spiral Cutterhead Planer with 4-sided carbide Tips (Two Speed-New), Dust Extraction Fitting, Fence Adapter, 2-1/2", POWERTEC 70005 Dust Filter Bag for Wall Mount Dust Collectors, 3 Micron, PSI Woodworking DBGULP Big Gulp Dust Hood, Makita KP0800K 3-1/4" Planer, with Tool Case , Blue, RIKON 25-135H | 13 Portable Planer with a 6-Row Helical-Style Cutter Head and 26 HSS Insert Cutters featuring alternating cutter pattern and two-speed feed rate which produces a smoother cut surface, JET JWP-208HH, 20-Inch Planer, Helical Head, 230V 1PH, 5HP (708544), POWERTEC 70151 Dust Hood Rectangular Funneled Shape, 4-Inch By 10-Inch, POWERTEC Dust Port and Screw Set for PL1250, PL1251 and PL1252, Tabletop 4 Dust Hood Collector Large 2-1/2" x 16-1/2" Shop Dust Collectors for Woodworking for Miter Saw, Lathe, Radial Arm Saws, & More Lightweight & Portable Dust Collection Fittings, Milwaukee 2623-20 M18 3-1/4" Planer - tool Only, VEVOR Woodworking Benchtop Jointers 6inch with 1650W Motor,Heavy Duty Benchtop Planer Precise Cutterhead 2000rpm ,2 Push Blocks Fence Depth Scale,Large Aluminum Work Table for Woodworking, DEWALT Miter Saw Dust Collection Adapter, DWE575/DWE575SB Compatible (DWE575DC), 13.5" x 7" x 6" Deep ABS Plastic Dust Hood with 4" OD Opening for Dust Collector Systems 73479, BLACK DUST GRATE - DUST COLLECTION By Peachtree Woodworking - PW460, POWERTEC 70132 14-Inch Table Saw Dust Hood, WoodRiver Large Flanged Dust Hood with 4" Port, 12 x 12 x 2.5 Inch ABS Plastic Flange with 4 Inch OD Opening for Dust Collector Systems 73467, 12-1/2-Inch Double Edges Planer Knives For Grizzly G0505, Mastercraft 55-5503-4 55-5504 Planer, 12-1/2-Inch x 11/16-Inch x 1/8-Inch Planer Blades - Set of 2, 13 inch Planer Knives Replacement for DeWalt DW735 DW735X Planer,Replace DW7352 - Set of 3, FOXBC 12-1/2 Inch Planer Blades Replacement for DeWalt DW734 Planer, Replace DW7342 - Set of 3, BOSCH RA1054 Deluxe Router Edge Guide with Dust Extraction Hood & Vacuum Hose Adapter , Black, Makita XPK01Z 18V LXT Lithium-Ion Cordless 3-1/4-Inch Planer, Tool Only, Quality Woodworking Tools and Project Kits, All customers get FREE Shipping on orders over $25 shipped by Amazon, Vacuum & Dust Collector Replacement Parts. For planers, we recommend a roller stand with a single wide roller like our Rockler Roller Stand or our Fliptop Roller Stand. Measure the infeed and outfeed clearances to be sure you 've got enough room for your maximum stock length to feed into and out of the planer. Setting it up to visualize a layout for it: Im recycling the short, flexible hose from my old dust collector for this project, since it was not needed on the rebuild. The outfeed side comes out a bit further, and I put precisely cut pieces of maple between the melamine bed and the top of the stand as spacers. It fits neatly in the space beneath the outfeed table: The filter screen stopped all of the fine shavings, and despite the filter being this clogged, there didnt seen to be any reduction in airflow. Tuve por primera vez la idea para este proyecto hace dos, The spindle sander I have has served me well in the 10+ years I've owned it. Your use of any material contained on this website is entirely at your own risk. Definitely strong enough.

This is a good view of how the maple strips fit down over the metal guides. The main reason is that I didnt have many projects that required it, what with my move to a new house and the renovation that had to be done before the garage became my new workshop. Made of 3/4 BB ply, there is a horizontal baffle inside about 1/3rd of the way from the top with a hole in it which allows air to exhaust up through to the vent on the side. For the short length of hose, we offer 4" dust collection hose by the foot, and our Dust Right 5-micron Dust Collection Bags or 30-micron Dust Collection Bags, are perfect for capturing the chips. woodarchivist Powered by a Dust Right Vortex 4" dust separator. Hopefully these tips will get you up and running with your new planer! To make the stand easy to move around, I made these casters: I got the wheels from a pair of cheap, fixed casters and bolted them to the 1/2; plywood brackets. No leaks and the filter on the side catches all of the very limited amount of dust that makes its way up the baffle into the upper chamber. I used my long reach clamps to hold it down while I fasten it in place: Just two screws through the outfeed and into the maple blocks hold it. The content contained on this site is provided for informational purposes only and does not constitute professional advice. http://www.leevalley.com/wood/page.aspx?c=2&p=30282&cat=1,42401, http://www.infinitytools.com/products.asp?dept=1111, Quote from: Dan Clark on April 04, 2007, 10:27 AM, https://www.facebook.com/pages/Blue-River-Cabinetry/145948728750069, http://www.taunton.com/finewoodworking/ToolGuide/ToolGuideProduct.aspx?id=5540, Quote from: Matthew Schenker on April 05, 2007, 05:38 PM, http://www.woodworkingonline.com/2006/12/13/coming-up-in-shopnotes-91/#more-436, http://www.woodworkingonline.com/wp-content/uploads/2006/11/Planer%20Stand.jpg, Quote from: Dan Clark on November 07, 2007, 09:56 AM, Sugar Bear - South Lake Tahoe, California, USA. DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ.

We are proud of the quality of our products, and we stand behind them 100%.

Works great for now. A better strategy is to pull the bucket out halfway before pulling out the filter, so that the shavings fall into the bucket, and not on the floor. If that doesn't do the trick, we offer replacement knives for most of the planers we sell.

You might be able to solve the problem by shifting one of the knives so the nicks are staggered and cancel each other out. You can use this trick in your shop, too, by clamping the plywood to your workbench, provided the bench is on casters and can be positioned properly. Get 500+ tool plans, full site access, and more. Shop vacuums are not recommended for planers, as they are underpowered, and the narrow hose will quickly become clogged with the bulky shavings.

The objective is to make the stand as simple as possible, with a plywood top, plywood bottom shelf and 23 legs. About thirty minutes before I went to work, I got a wild hair and said, "I wonder if I can get my new DW735 set up and try it out in 30 minutes?!?". To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Check out our ear protection options here, including many that will replace the noise with the music or podcast of your choice. planer jet stand open woodworking jwp tools inch surface power Custom Doors, Drawers & Glass Accessories, Learn Woodworking Tips & Tricks with Rockler, Video: Eight Tips for Making Sliding Doors, High-quality brands and products you can trust, Expert advice and free post-purchase support, Exclusive, innovative products that help you Create with Confidence, Detailed instructions, technical specs and guides to make the most of your purchases. planer Also, if you're planning on planing a lot of rough lumber, a good pair of gloves will help fend off splinters. I've banged my shins and feet up way too much trying to catch lumber as the stands are falling over (if your lumber drops at all and doesn't land on top of a roller stand it just pushes it over or out of the way, not good). Although Festool strives for accuracy in the website material, the website may contain inaccuracies. These can be made with all kinds of customized features, but the Ultimate Planer Cart features an extendable infeed/outfeed table that runs on ball-bearing drawer slides, plus folding side wings to hold your material. The infeed projects out about 6; and I made a fancy hardwood bracket to support it. With the strips put on the new bed, I had to check to make sure that the side shields on the machine clear it: Just enough space.

Well stretched, but still attached. Check out this video on planer maintenance for a more in-depth look at tuning up your planer. The melamine not only provides an unbroken path through the machine, it also has a very slick surface. Web Design by Whetham Solutions.

To attach the planer to the top, I made these blocks from plywood, glued and nailed at each corner of the machine: These keep it in place, and the new melamine bed will hold it down. Heck, even with a dust collector I dont see it getting too much better. shopsmith jointer power jointers woodworking everyone tool academy mounted stand mark figure These are screwed on the sides of the front legs. Hi. Finished and moved out into the workshop floor, ready to use. DIY Planer Dust Collection Stand - comment on how to build a Planer Dust Collection Stand - 0 comments.

| Copyright I later changed my mind on that, figuring the 3/4; plywood was strong enough on its own. dewalt dw735 dust planer collector lumberjocks chip posting woodworking workshop projects wood chips

This means you won't have to empty the bags nearly as often, and your dust collector will maintain strong suction for longer. Nice all in one solution. I traced the outside circumference of the trash can on the plywood that will be used for the top of the stand to see where the port would have to be: I then cut a hole through and also made a collar for the hose adapter to fit into. Anyways. Definitely can work. Lifting that 90lb beast up on to a table was less hassle than I thought. I cut a hole through the plywood top for the exhaust port. 0 Members and 1 Guest are viewing this topic. The go-to place for those who are new to woodworking. I expect Ill get a lot more use out of this planer from now on. Before starting in on the build, I had to figure out how big the stand would be and what I would use for the bin. For international returns, please click here. If you continue to use this site we will assume that you are happy with it. That a great idea if you dont have a dust collector. No bolts required. Inspired by several designs Ive seen here I built a cart with dust collection for my newly acquired Dewalt DW735 planer. For the best experience on our site, be sure to turn on Javascript in your browser. This planer stands out from all others (that I know of), in that it has a powerful built-in blower capable of pumping the chips into a collection bin. Latest Projects | Latest Forum Topics. Cheers from "On Top DownUnder" Crowie, 2022 Verticalscope Inc. All Rights Reserved. -- Dave, Downers Grove, Il. We use cookies to ensure that we give you the best experience on our website. Not only do you get sturdy support, but the foot-operated caster system lets you easily roll the planer into position and lock it with just a flip of the pedal. Note that for the same reason, you should never position yourself between the ends of the material and the wall.

This also holds the planer down on the top of the stand. And other than wanting to experiment with making one from scratch in the future and figuring out the easiest, Making the big cabinet doors is the final phase of my remodeling project for the front of my shop. Shop all replacement planer blades. Advice? The broad, flat surface of the single roller will support both wide and narrow stock, as well as stock being planed on edge. And although it has been working perfectly ever since, I wanted to. This is something that I saw Jay Bates had done with his, so I figured it would work for me too: I wanted edges on the melamine to clean it up and guide the wood being planed, and I cut pieces of maple for this. Copyright 2022 IBUILDIT.CA. As for the dust collector that does the grunt work, you should use a dust collector with at least a 4" diameter hose. Press J to jump to the feed. Makita 193036-7 Dust Collector Hood for 2012NB Planer , Blue, FREE Shipping on orders over $25 shipped by Amazon, Dewalt 5140006-97 Planer Dust Chute Genuine Original Equipment Manufacturer (OEM) part for Dewalt, 5140006-97 Planer Dust Hood for DeWalt DW734 (1-Pack), DEWALT DW7331 Dust Hood for use with Dust Collection System, POWERTEC 70122 Big Gulp Dust Hood for Woodworking Dust Collection Dust Hood. Unlike most planers of this type, this one does not come with infeed and outfeed tables. Your order will come with a return form with convenient instructions, or you may send your returns directly to Returns Department, Rockler Woodworking and Hardware, 4365 Willow Drive, Medina, MN 55340. If one end of the planer will have more clearance than the other, make it the outfeed side.

Once I do a bit more planing Ill eventually trim the dust hose to a more reasonable length being this is my first planer, I wanted to make sure I had enough length.



Sitemap 4